According to the PK70-NBPKX500-UsersManual.pdf, an example project is "included with the board"; however, I just got a box with two boards in it - no CD with files on it. Presumably I can get them (XilinxBladeGpio.v and XilinxBlade.ucf) somewhere on this site, but I couldn't find them.
Also, I cannot find any information regarding the pinout of the external connector. Of course, most pins are probably connected directly to PFGA pins, but I don't know which are connected to which.
So, where can I get the example files and the connector pin-outs???
Thanks!
FPGA Blade board example files and connector pin-out
Re: FPGA Blade board example files and connector pin-out
Should be in
nburn\examples\pk70\xilinxblade.....
This is installed with the PK70 tools, even if you don't have a FPGA blade you still get the code
The pinout is in the ucf file in that example.
The schematic is PDF schematic is attached...
nburn\examples\pk70\xilinxblade.....
This is installed with the PK70 tools, even if you don't have a FPGA blade you still get the code
The pinout is in the ucf file in that example.
The schematic is PDF schematic is attached...
- Attachments
-
- NBPKBX-500CR-SCH-R1p3.pdf
- (101.88 KiB) Downloaded 508 times
Re: FPGA Blade board example files and connector pin-out
Hi Paul,
Oh, but my tools are a little old - 2.4, IIRC. Is it possible to get the examples? Or must I upgrade the tools to get support there for the FPGA tools?
Bob
Oh, but my tools are a little old - 2.4, IIRC. Is it possible to get the examples? Or must I upgrade the tools to get support there for the FPGA tools?
Bob
Re: FPGA Blade board example files and connector pin-out
This has been part of the tools for a long long time...
It should be with any tools set after 2010....
What is in your nburn\examples\pk70 folder?
Paul
It should be with any tools set after 2010....
What is in your nburn\examples\pk70 folder?
Paul
Re: FPGA Blade board example files and connector pin-out
C:\Nburn\examples\pk70>dir
Volume in drive C is OS
Volume Serial Number is C41E-73D8
Directory of C:\Nburn\examples\pk70
07/11/2011 01:54 PM <DIR> .
07/11/2011 01:54 PM <DIR> ..
07/11/2011 01:54 PM <DIR> DigitalBladeDemo
05/19/2008 12:09 PM 551 makepk70
05/02/2008 12:21 PM 167 makepk70install
07/11/2011 01:54 PM <DIR> MBladeDemo
07/11/2011 01:54 PM <DIR> PK70FactoryDemo
07/11/2011 01:54 PM <DIR> Quad485BladeFactoryApp
07/11/2011 01:54 PM <DIR> QuadUartBladeFactoryApp
07/11/2011 01:54 PM <DIR> QuadUartBladeMMFactoryApp
07/11/2011 01:54 PM <DIR> QuadUartBladeSimple
2 File(s) 718 bytes
9 Dir(s) 95,801,577,472 bytes free
The release_tag file contains "Rel24_rc2"
Volume in drive C is OS
Volume Serial Number is C41E-73D8
Directory of C:\Nburn\examples\pk70
07/11/2011 01:54 PM <DIR> .
07/11/2011 01:54 PM <DIR> ..
07/11/2011 01:54 PM <DIR> DigitalBladeDemo
05/19/2008 12:09 PM 551 makepk70
05/02/2008 12:21 PM 167 makepk70install
07/11/2011 01:54 PM <DIR> MBladeDemo
07/11/2011 01:54 PM <DIR> PK70FactoryDemo
07/11/2011 01:54 PM <DIR> Quad485BladeFactoryApp
07/11/2011 01:54 PM <DIR> QuadUartBladeFactoryApp
07/11/2011 01:54 PM <DIR> QuadUartBladeMMFactoryApp
07/11/2011 01:54 PM <DIR> QuadUartBladeSimple
2 File(s) 718 bytes
9 Dir(s) 95,801,577,472 bytes free
The release_tag file contains "Rel24_rc2"
Re: FPGA Blade board example files and connector pin-out
PM sent with a zip file.
Paul
Paul
Re: FPGA Blade board example files and connector pin-out
Hi Paul, I got the PM, but there doesn't seem to be any attachment; I tried replying to the PM, but it seemed to get stuck in the Outbox - hopefully this makes it through...
Re: FPGA Blade board example files and connector pin-out
I sent you a direct email with the zip file.
Paul
Paul