NetBurner Community Forum

Thanks Tom. I'll give it a try. If I can isolate it from the network (everything connected to a simple 10/100 switch) that should point me in the right direction.

John

I've been seeing something odd when working on my equipment at home. When I boot up a MODM7AE70 device (one of several that I incorporated on various products) I'm having some network connection issues. The MODM7AE70 connects to my network (regular 10/100 Ethernet) then it "disappears". By ...

Thanks Tom!

I'm running the MODM7AE70 in several products and many of my customers are particular about security. To that end I've got a customer that noticed one of our units sending beacons to discover.netburner.com. I understand that this is intended operation but I need to prevent this.

I'm using the ...

Tom/Paul,

Thanks for the quick response. I created a ticket. I've got a customer that should be able to test it in addition to whatever testing I can do here.

This is using one of your MODM7AE70 modules operating under 3.5.3.

Thanks!
John

The UDPPkt class is very complete and I noticed in the Send function that I can add a TTL parameter. Is there a way I can add a DSCP value to the packet header?

Apologies if this is a simple question but I've been using QSPI on the MODM7AE70 for some years but the device was always a Master which generated the clock etc. I now have a new design where I'd like to use QSPI (or any SPI on the MODM7AE70) but it needs to act as a Slave. What I'm looking for is ...

I have a similar question regarding this pin. Apparently at some time I decided it was available to use as a GPIO resource. Am I correct in thinking that this is not actually true and there is no way in software to change the functionality of this pin?

...and here I was just getting used to having ...

Thanks Tom.

I don't plan to do any configuration via SNMP but like most companies our customers are looking for security so I'll be going the v3 route. The mib should be pretty simple in my case. I've got an example of a v1 mib to go by. Hopefully that will be enough. We prefer configuration to be ...

I see that Netburner recommends DMH software for an SNMP package. I went to the DMH page but they don't show the MODM7AE70 as being one of the Netburner SOMs that they support. Could be that they have just not updated their page.

I'm planning to implement a very simple SNMP query/notification ...