NetBurner Community Forum

HI Tom,

First things first.

1- I will downsize my design to a regular RS-232
2- I will work on my TCP/IP communication (learn more about the different timeout and connection parameter).
3- I will work with the command mode like I design it in the first place. (Changing the outgoing IP adress and ...

HI Tom,
Thant was a nice update.
1- You demonstrate that you can do the modification and eventually make it perfect. BUT!
2- The RS-485 in command mode is producing ECHO . All character come back to me so I need to go very slow for not to have collision
3- The RS-485 in connect mode is working on ...

HI Tom,

Thank you, I will let you know ASAP. I will look what I need to update the firmware and confident to find
everything in your documentation and web site.

Still have a lot to do but it is getting forward.

Lyn

HI Tom,

Thank you very much for you support.

Well you are right. The SBL2E is working correctly in RS-485 and my RTS pin is OK!. But don’t discard your setup yet.

With your same setup try to go in the command mode (“+++” whit or without the TCI/IP connection). Now you are blind, your command ...

I Tom,

Sorry for the copy & paste confusion and I don’t have access to my previous hardware design (see the IVD documentation).

1- I tried the “full” free RTS pin3.
1.1 no move in the RS-485 mode
1.2 When program in RS-232 mode with hardware flow control the pin goes to low level. And go back ...

HI Tom,
I’m using the SBL2E-200

“NetBurner SBL2e Devices network-enable serial, analog, or digital I/O devices out of the box - no programming or development is required”

On the WEB configuration page it is noted: Firmware Version: SBL2E v1.65 Oct 4 2012
I don’t mind changing the Firmware but I ...

HI,
I worked with the SBL2E-200 in 2011, at that time everything was fine in RS-485 Half-duplex. Today I Copy & Paste that old design and I can’t make the PORT0 /RTS pin to move.

- It is the same on 3 different module: Firmware Version: SBL2E v1.65 Oct 4 2012
- PORT 1 work fine in debug and respond ...