Page 1 of 1
SD Card address change unsupported??
Posted: Mon Jun 23, 2008 2:54 pm
by pgrosshart
Hello,
We built a board for the 5234, with a SD Card along with a bunch of SPI devices. Unfortunately the SPI code sent with Eclipse is not executed! Can the real code that setups up the QSPI be available??
Thanks,
Paul
Re: SD Card address change unsupported??
Posted: Tue Jun 24, 2008 7:17 am
by seulater
Paul, i dont have time to look for you right now, but take a peek in the "C:\Nburn\include\effs_fat" directory.
Re: SD Card address change unsupported??
Posted: Thu Jun 26, 2008 5:55 am
by pgrosshart
The directory is *.h's - but still when the code is changed and system is rebuilt, its not used. We 'fixed' the software by adding a jumper on the board.
Re: SD Card address change unsupported??
Posted: Sun Sep 21, 2008 5:29 am
by dominici
Dear all,
I approach the Neburner world and for my new prototype I wuold like to add an SPI SD card. Reading your post it seems that there is something that have to be take in account for the SD card design. I would like to know if I have to put something in my hardware design for use SPI.
Thank you in advance for your advices.
Best Regards,
Fabrizio
PS: My board will be based on MOD5282 on MOD5234