NetBurner Community Forum

Posted: **Wed Jun 15, 2011 8:50 am**

Do the 16 channels of the eTPU inputs/outputs go to one of the connectors on the MOD5234 module? If so, which pins are they?

Thanks,
Brian

Posted: **Wed Jun 15, 2011 10:44 am**

The product web page has all the hardware information for the modules:
http://www.netburner.com/products/core_ ... d5234.html

You should look at the datasheet:
http://www.netburner.com/downloads/mod5 ... iagram.pdf

MOD5234 eTPU pins