SB700EX and I2C

[davidhoy]

The SB700EX has an internal I2C bus that connects some of the peripheral devices, such as the real time clock. Is it possible to connect external devices to this I2C bus via the J3 connector? I have not been able to find any information about this connector, so any help would be appreciated.

Thanks,
David.

[pbreed]

I'm home so don't have my SB700 schematics etc...
so I'm not 100% sure what J3 is, but if J3 is the internal connector... its factory test and
does not have I2C signals on it.....


Paul