NetBurner Community Forum

Hello fellow Netburner users & developers,

I had to implement a CAN bus communication for out MOD54415 application. Because our CAN0 is used for I2C (we migrated from MOD5272) I had to switch to CAN1.
In the example which came 2.6.0 NNDK the pins 42 & 39 where set to CAN0_TX and CAN0_RX, so I made ...

Hi Dan,

if I use FLA to flash my application it just fails with "Download failed"

The make things maybe more clear (or complicated), we have a small C-application which gives us an slightly more comfertable monitor e.g. I can type "md a5+x1240", which dumps 256 bytes starting at the contents of ...

Hi seulater,

maybe in the future, but for now I'm 'talking' to an PC-MMI through a UTP connection which runs in C (Rx & Tx functions), but is fed in assembly. Also we are communicating with a Siemens S7-300 through UTP on a second port.
Problem is, I can't program the MOD54415 not like the MOD5272 ...

Hello guys,

we have been using the MOD5272 for some years now to make machine-controls. A few weeks ago we started with a new project which is based on the MOD54415 and the excisting software.
After changing a few addresses all look fine, BUT we couldn't program the MOD54415. After some trial on ...