NetBurner Community Forum

Nothing needs to be done. When you start a new project, select the platform you want to use from the drop down list.
Thats it ; )

You can get a graphical view of it here.

http://www.versamodule.com/NanoCheetSheet/Main.html

and where this is simple and broken down (thanks versamodule) again, the address, I'm not understanding what it is and where it comes from. I'm assuming that if I wanted to write 24 bits, I could follow the 16 bit example, but not sure why he references a register location versus data... Sorry if t...

Have you gotten it to work with the example yet ? All of my work is on the nano, so i am pulling from assumptions for the MOD. In the example you have: // J2[30].function(PINJ2_30_DSPI1_PCS0); J2[25].function(PINJ2_25_DSPI1_SCK); J2[27].function(PINJ2_27_DSPI1_SIN); J2[28].function(PINJ2_28_DSPI1_SO...

I would agree with Chris 100%. If your not familiar with Semaphores yet, get it working the way you know. Then once you get that under your belt implement the instructions Chris has shown. It is the best way to go about it.

As for the 2.2k resistor... pullup for the SDA? or for SDA and clock?

yes

As far as SPI goes, lets do what rnixon suggested by starting a new post just for that.

This code i pulled from the Nano54415, should be the same for the MOD. I leave that up to you to check. Here is what you can do. Dont forget to check that there is at least a 2.2k resistor on both lines to 3.3v (VERY IMPORTANT!!!) If you want to know a bit more about a function, say like I2CStart, p...

Is there a reason why you cant change the monitor port to Com1 instead ?

When using tasks you should place a "OSTimeDly( x );" inside the while loop to allow other tasks to fire. void ProcessLineData(void * pd) { while (1) { if (g_bDataCaptured) { LED3.set(LED_ON); memcpy(g_ulPixelData, g_ulRawPixelData, sizeof(g_ulPixelData)); LED1.set(LED_OFF); LED2.set(LED_O...

It can be done with Silverlight or Adobe flex. Here is a demo i made a long time ago using Flex. The NB board has 3, .mp3 files on the SD card. When i point my browser to the board it serves up the app to the browser and then starts streaming the audio file to it. As its streaming it, it starts to p...