Search found 624 matches
- Mon Sep 16, 2024 4:04 pm
- Forum: NetBurner Software
- Topic: Porting code from MOD5441X to SOMRT1061
- Replies: 4
- Views: 2251
Re: Porting code from MOD5441X to SOMRT1061
Is there anything stopping me from doing this: Yes there is. Ok, so architecture theory time. The new HalStorage methods are an abstraction layer between the OS/Application and some form of non-volatile storage. In the case of the SOMRT this is because it uses the EFFS Std Filesystem as a primary i...
- Thu Jun 15, 2023 4:40 pm
- Forum: NetBurner Software
- Topic: SSL Server
- Replies: 3
- Views: 4914
Re: SSL Server
Can you post the full output? Verification failing makes sense, as you don't have a certificate signed by a known Certificate Authority, but that shouldn't close the connection. Is it closing the connection and then dropping you back to the command prompt? Given that you've got the HTTPS server work...
- Thu Sep 09, 2021 5:52 pm
- Forum: NetBurner Software
- Topic: MOD 5234 Websockets How to handle connections
- Replies: 2
- Views: 2645
Re: MOD 5234 Websockets How to handle connections
Websockets have a Ping/Pong method defined in the spec, which was not fully implemented or exposed through the API. Open a support ticket, and we can send you a patch.
-Dan
-Dan
- Tue Dec 08, 2020 3:13 pm
- Forum: NetBurner Software
- Topic: TCP/IP stack trapping
- Replies: 14
- Views: 10901
Re: TCP/IP stack trapping
Just want to pop in and add a bit here. You've got lots of eyeballs on this one since it's quite bizarre what seems to be happening and you see to be able to reproduce it trivially, whereas we cannot. The status is as follows: the trap is due to a NULL pointer in a buffer member used for read tracki...
- Thu Mar 26, 2020 1:55 am
- Forum: NetBurner Software
- Topic: Websocket browser-to-Netburner length issue
- Replies: 4
- Views: 5039
Re: Websocket browser-to-Netburner length issue
Remove the HTONS from line ~173 of 'nbrtos/source/websocket_server.cpp' m_remLen = m_remainingLen = HTONS(frame->length); Additionally, remove the HTONL from line ~202 of the same file m_remLen = m_remainingLen = HTONL(frame->lengthLo); Somewhere along the line the websocket frame structures were up...
- Wed Mar 25, 2020 10:45 pm
- Forum: NetBurner Software
- Topic: Why use -mfloat-abi=softfp on MODM7AE70?
- Replies: 4
- Views: 5830
Re: Why use -mfloat-abi=softfp on MODM7AE70?
The problem I always run into with documenting these things is that I know too much. I'm the person who designs those linker files these days after all! For things that are not 'driver' or 'software library' related, the question is always how to collect the information in a way that is accessible a...
- Wed Mar 25, 2020 12:16 pm
- Forum: NetBurner Software
- Topic: Task Switching
- Replies: 6
- Views: 6210
Re: Task Switching
Where are you defining your priorities?
The system Task Priorities are set in 'include/constants.h'. Additionally, UserMain which runs at the MAIN_PRIO which is 50 by default. So, by your defines, that puts UDP_TASK_PRIO at 52, which is lower priority than UserMain.
The system Task Priorities are set in 'include/constants.h'. Additionally, UserMain which runs at the MAIN_PRIO which is 50 by default. So, by your defines, that puts UDP_TASK_PRIO at 52, which is lower priority than UserMain.
- Wed Mar 25, 2020 11:09 am
- Forum: NetBurner Software
- Topic: Why use -mfloat-abi=softfp on MODM7AE70?
- Replies: 4
- Views: 5830
Re: Why use -mfloat-abi=softfp on MODM7AE70?
Where are your stack and samples located? If you've simply created a random variable, it will be allocated is SDRAM, which will end up bottle necked. Almost all hard problems end up being memory bandwidth bound before being CPU bound. You will want to use the FAST_USER_VAR and if you've allocated a ...
- Thu Sep 19, 2019 12:30 pm
- Forum: NetBurner Software
- Topic: MODM7AE70 GPIO configuration question
- Replies: 1
- Views: 3406
Re: MODM7AE70 GPIO configuration question
Setting the pin prior to enabling the output is in fact the correct way. This is actually one of the reasons why for the MODM7AE70 we diverged the behavior of the pins class from the Coldfire platforms to require that you explicitly set the pin function to output (to allow presetting the output stat...
- Thu Sep 19, 2019 12:26 pm
- Forum: NetBurner Software
- Topic: Embedded IPv4 Addr in IPv6
- Replies: 4
- Views: 5352
Re: Embedded IPv4 Addr in IPv6
I'm just going to go with: yes. An IPv6 address is by definition a 128-bit long bit sequence; the IPADDR6 structure is a 128-bit long array of 32-bit values . Since we can only access the 128-bits in 32-bit chunks, we have to slide the window until the correct chunk appears underneath our index. Thu...